Reduced oxygen nanocrystalline materials show improved performance — ScienceDaily

Researchers at the University of Connecticut have found that reducing oxygen in some nanocrystalline materials may improve their strength and durability at elevated temperatures, a promising enhancement that could lead to better biosensors, faster jet engines, and greater capacity semiconductors.

“Stabilizing nanocrystals at elevated temperatures is a common challenge,” says Peiman Shahbeigi-Roodposhti, a postdoctoral research scholar with UConn’s Institute of Materials Science and the study’s lead author. “In certain alloys, we found that high levels of oxygen can lead to a significant reduction in their efficiency.”

Using a special milling process in an enclosed glove box filled with argon gas, UConn scientists, working in collaboration with researchers from North Carolina State University, were able to synthesize nano-sized crystals of Iron-Chromium and Iron-Chromium-Hafnium with oxygen levels as low as 0.01 percent. These nearly oxygen-free alloy powders appeared to be much more stable than their commercial counterparts with higher oxygen content at elevated temperatures and under high levels of stress.

“In this study, for the first time, optimum oxygen-free nanomaterials were developed,” says Sina Shahbazmohamadi, an assistant professor of biomedical engineering at UConn and a co-author on the paper. “Various characterization techniques, including advanced aberration corrected transmission electron microscopy, revealed a significant improvement in grain size stability at elevated temperatures.”

Grain size stability is important for scientists seeking to develop the next generation of advanced materials. Like fine links in an intricately woven mesh, grains are the small solids from which metals are made. Studies have shown that smaller grains are better when it comes to making stronger and tougher metals that are less prone to cracking, better conductors of electricity, and more durable at high temperatures and under extreme stress. Recent advances in technology have allowed materials scientists to develop grains at the scale of just 10 nanometers, which is tens of thousands of times smaller than the thickness of a sheet of paper or the width of a human hair. Such nanocrystals can only be viewed under extremely powerful microscopes.

But the process isn’t perfect. When some nanograins are created in bulk for applications such as semiconductors, the stability of their size can fluctuate under higher temperatures and stress. It was during the…

Read the full article from the Source…

Leave a Reply

Your email address will not be published. Required fields are marked *